How to Enter VW Code

Find your VW radio below to get instructions on how to enter the unlock code.

Please note: If the word “SAFE” is displayed on your VW radio then try holding down the SCAN & MODE button’s together for 10 seconds. This should then display 1000 (the code entry screen) where you can begin code entry. Further instructions can be found below.

VW RCD 300

Turn on your radio, if the word SAFE appears on screen press SCAN & MODE together for 10 seconds until 1000 appears.

You can then proceed to enter your radio code.

Once 1000 is displayed on screen, you can cycle through the digits of the code using the top 2 buttons on each side of the radio.

Once you have entered the correct code, click the ENTER key (bottom right).

A full demonstration can be seen in the video.

VW Gamma

Turn on your radio, the cycle through the digits until your code appears correct on screen using the following buttons:

1 – Keep pressing this button until you have the correct first digit of your unlock code.
2 – Keep pressing this button until you have the correct second digit of your unlock code.
3 – Keep pressing this button until you have the correct third digit of your unlock code.
4 – Keep pressing this button until you have the correct fourth digit of your unlock code.

Check that you have entered the correct radio code. Then press and hold the single right arrow key until the radio unlocks.

A full demonstration can be seen in the video.

Need Your Volkswagen Unlock Code?

Get your Volkswagen radio unlock code in less than 10 minutes from Radio Code King!

Need Different Entry Instructions?

Looking for different radio type? Check out the radio code entry index page.